¶ UNIT IDENTIFICATION
Each unit is equipped with a nameplate displaying the basic technical parameters.
There are two nameplates in total, one for the supply section and one for the exhaust section of the unit.
A: Serial number
B: Designation of the nameplate type SUPPLY / EXHAUST. Nominal air flow rate
C: Fan information
• type, pressure loss (external, total), K-factor.
• operating speed / nominal speed,
• nominal power values, voltage, current
D: Order number
E: Unit size
F: Construction certificate of the authorized body
G: Filter information
• type, pressure losses, composition
H: ZZT information
• pressure losses
I: Cooler information
• capacity, flow rate, medium
J: Heater information
• capacity, flow rate, medium
K: Pressure loss of the damper in the end wall
A: Location of the nameplate on the chamber.
B: Unit serial number (complete KJM assembly).
C: Total weight of the chamber.
D: Additional information, e.g., K-factor for calculating air flow rate through the fan.
E: Chamber position in the unit assembly 9F0, unit size (M75).
F: Type of chamber installation.
G: Basic parameters of the chamber installation.
H: Additional information, e.g., Product construction certificate.
For KJM, each chamber is equipped with an overall view of the KJM assembly, highlighting the position of the respective chamber, as shown in the following image:
