¶ ATTACHMENT A. ASSEMBLY OF COMPARTMENTS WITH CENTRAL FRAMES
Applies to units of type size M20/P20 and above.
The compartments with central frames can be handled in the same way as described in the section Handling, Transport, and Storage for KJM.
After positioning the compartments, it is necessary to cover the central frames according to the following procedure:
The following fasteners are provided for assembly (they are placed in the fastener box).
A: Self-tapping sheet metal screw 4.8x13 mm
B: Plastic cover plug for a 15 mm diameter hole
OVERALL VIEW:
A: SIDE PART 701-01K-xx
B: FRONT/REAR PART 701-01K-xx
NOMENCLATURE OF COVER PARTS:
A: Unit chamber number in the assembly (A chamber "A", 1291 = assembly number)
B: Side termination of the part (A = front corner, B = front/rear division, C = side corner)
C: Part name
TYPES OF PARTS 701-01K:
- FRONT/REAR PART - IN ONE PIECE (base frame made from one piece)
A: END OF PART - SIDE "A"
=> PART 701-01K-AA
- FRONT/BACK PART - TWO PIECES (base frame consists of two pieces)
A: END OF PART - SIDE "A" |
B: END OF PART - SIDE "B"
=> PART 701-01K-AB
C: END OF PART - SIDE "B" |
D: END OF PART - SIDE "A"
=> PART 701-01K-BA
- SIDE PART - SINGLE PIECE (base frame consists of one piece)
A: END OF PART - SIDE "C"
=> PART 701-01K-CC
- SIDE PART - TWO PIECES (base frame consists of two pieces)
A: END OF PART - SIDE "C"
B: END OF PART - SIDE "B"
=> PART 701-01K-CB
C: END OF PART - SIDE "B"
D: END OF PART - SIDE "C"
=> PART 701-01K-BC
- DETAILS OF SIDE TERMINATIONS
A: END OF PART - SIDE "C", WITHOUT BEND
B: END OF PART - SIDE "A", BEND 15 mm
END OF PART - SIDE "B", BEND 9 mm
(SAME SHAPE AS "A")
FIXING PARTS TO THE BASE FRAME
(applicable for front/rear/side parts)
1) SCREW ALL PARTS 701-01K USING SELF-TAPPING SCREWS 4.8x13 AND CLIPS IN PARTS 701-01K TO THE BASE FRAME PARTS, IN THE MOUNTING KIT (A HOLE WITH A DIAMETER OF 3 mm IS PREPARED IN THE BASE FRAME PART).
A: SCREW ALL PARTS 701-01K USING SELF-TAPPING SCREWS 4.8x13 AND CLIPS IN PARTS 701-01K TO THE BASE FRAME PARTS, IN THE MOUNTING KIT (A HOLE WITH A DIAMETER OF 3 mm IS PREPARED IN THE BASE FRAME PART).
B: SCREW THE CORNER CONNECTION OF PARTS 701-01K USING SELF-TAPPING SCREWS 4.8x13
A: COVER ALL HOLES WITH COVERS FROM THE MOUNTING KIT.