TPM 175/25 - rev.1 - Valid from 01.12.2025
¶ CPV MANDÍK COMPACT AIR HANDLING UNITS
The CPV range of compact air handling units is designed for central distribution and air treatment for commercial and industrial applications. The unit design is vertical - the outlets point upwards.
Thanks to advanced software and a well-thought-out design, the units can be designed dynamically. This enables a unique design of both standard and atypical units according to a specific assignment, including dimensional restrictions. A wide range of internal components and their combinations can be selected. The units are fully manufactured and certified in a unique frameless design and are intended for indoor installation.
The standard configuration includes the installation of a counterflow plate heat recovery exchanger, the option of up to two simultaneously installed heat exchangers for heating and cooling, the selection of any fans according to the preferred price/efficiency/design type, the option to select a mixing/recirculation function for extract air, the option to select circular or rectangular outlets, the option to install the electrical switchboard as an internal built-in or external unit, and much more.
The units are available for air outputs from 500 to 10 000 m3/h and are supplied as standard as plug&play, i.e. including an integrated MaR system.
¶ 1. GENERAL INFORMATION
¶ 2. RELATED DOCUMENTS
¶ 2.1. COMMON DOCUMENTS
¶ 2.2. CPV-SPECIFIC DOCUMENTS
¶ 3. UNIT IDENTIFICATION
¶ 3.1. MACHINE IDENTIFICATION AND PRODUCTION NAMEPLATE
¶ 3.2. UNIT DIMENSIONS
The dimension of each unit is determined dynamically in 1mm increments. The dimension is determined by automatic calculation in the software according to the specific assignment.
The specific dimensions of the selected unit are stated in the relevant technical specification / on the identification label.
The maximum manufacturing dimensions (to the outer casing) are: length x width x height = 3880 x 2000 x 2200 mm.
¶ 3.3. CONNECTION DIMENSIONS
Depending on the specification, the unit may be equipped with rectangular or circular air outlets.
The dimensions of the connecting air outlets are calculated dynamically in the software according to the specific assignment in 10mm increments.
The specific connection dimensions of the selected unit are stated in the relevant technical specification.
¶ 4. SAFETY
The unit must be installed in an area with controlled access.